Prices are not available online. Please call (717)-843-8884 for a quote.
GT Metal Slim Handle
GT Metal Slim Handle – Allows sampling from narrow openings as small as 0.28″ diameter clearance.
GT Plastic Slim Handle
GT Plastic Slim Handle – Allows sampling from narrow openings as small as 0.28″ diameter clearance.
Grease Sampler Adjustable T-Handle
The Adjustable T-Handle, when used in conjunction with the Grease Thief® sampler, is designed to enter through a drain plug or access port to core a grease sample from a bearing, gearbox, or other grease lubricated component. The device is locked to a set depth and inserted into the component housing, pushing through the bulk, non-representative grease, and actuated at the set depth to core a sample. This ensures the sample is representative of the equipment condition. Once the core depth has been set, the tool can be used to repeatably take the sample from a controlled sample depth, bypassing the non-representative grease sitting in the housing. After it is withdrawn from the gearbox or bearing, the Grease Thief® is unscrewed from the T-handle, capped, and placed in a clean, labeled sample bottle for shipment to the laboratory. The T-handle can be wiped clean and re-used for subsequent samples.
- Maximum core set depth: 5 ¼”
- Minimum access port diameter: ⅝”
Grease Sampler Metal Double Extension T-Handle
The Double Extension T-handle is used in conjunction with the Grease Sampler Kits for MOV/Gearboxes to obtain representative and repeatable samples from Motor Operated Valves (MOVs) and other internal grease lubricated gearboxes and components. The stainless steel double extension T-Handle is a set depth sampling tool allowing the operator to control the depth of the sampling point. The double extension T-handle is threaded to receive the Grease Thief® fitting, and is used to activate the “stinger” probe when it contacts the component surface to be sampled. The double extension T-Handle provides additional control for grabbing a representative sample by allowing the mechanic to activate when the stinger compresses on or near the gear. The stinger probe allows the sampler to pass by grease in the gearbox that is not representative of the condition of the gearbox. When the stinger probe contacts the gear or bearing surface, it is depressed into the cylinder of the sampler, drawing in the grease that is directly adjacent to the gears. After the sampler is withdrawn from the gearbox, it is unscrewed from the extension T-handle, capped, and placed in a clean, labeled sample bottle for shipment to the laboratory. The stainless steel extension T-handle can be wiped clean and re-used for subsequent samples.
Pick-Pocket PB Sleeves – Box of 15
